Good quality brands of threads include Gutterman, Coates and Rasant. If you have checked the needles and thread, next on the list if your sewing machine is skipping stitches is sewing machine tension. TIP 8 - Check the tension of the sewing machine and try some different options on a scrap of fabric to get the right tension for the fabric you are using.
The upper and lower tension should be perfectly even with no loops or uneven stitches. Start by checking the tension dials and then consult your manual to see if the bobbin case has a tension screw. TIP 9 - Check your own tension. Are you feeling tense about this garment? Sometimes in our anxiety to get the job done we pull the fabric instead of letting it feed through naturally and cause unnecessary tension.
Let the feed dogs do the work of feeding the fabric through the machine. Don't push or pull. TIP 10 - In certain circumstances, sticky fabric such as leather or Lycra may be dragging underneath the sewing machine foot.
The ideal solution is to switch to a Teflon foot but alternatively, try a bit of sellotape on the bottom to help it glide over your fabric more evenly. TIP 11 - Look at the throat plate on your machines and check for any nicks that might be snagging the thread. Nicks can be caused by a needle bending and hitting the side of the plate. I generally need to replace my plate every couple of years.
Don't worry this is normally a very cheap part and is easily switched over with one or two screws. If none of these suggestions are working and you still have a sewing machine skipping stitches then it may be time to take your machine for service.
First, just make sure it is skipping stitches on all types of fabrics and not just one. If it is just one type of fabric and not others then it will be an incompatibility with your machine and the fabric. Why not make a copy of this handy little checklist and slip it into your machine handbook. It could be the best little timesaver you have readily available to stitch in time and save nine.
Your email address will not be published. Whether the stitch has skipped one or multiple times, it weakens seam strength and the appeal of the finished product. Therefore if you have found any skipped stitches, you should remove tat thread and re-sew the affected part. There could be various factors that lead to skipped stitches, but generally there are four major ones.
You can check the machine if one of the following happens:. Be sure to check if the bobbin or hook is in good condition, replace if it is damaged. Remove the needle by loosening the screw above the needle clamp, then re-insert it with the flat side of the needle facing the back. Place it without any space left in the shaft, and tighten the screw firmly. Before resuming sewing, test a few stitches.
When inserting the needle, the flat side of the needle should be facing the back. Do not let any space left in the shaft. When the needle is damaged, it is not able to hold the thread well and stitch the fabric. If the needle is dull or damaged, replace it with a new one. The needle on your sewing machine is a replaceable part and the most inexpensive part of your sewing machine.
Your first line of defense to skipping stitches is to change the sewing machine needle, being sure you are using the correct size needle for the fabric you are sewing. Anyone who loves to cook knows there is a difference in pans and ingredients. The same can be said when it comes to your sewing equipment. Using the wrong type of sewing machine needle can also cause skipped sewing machine stitches.
A ballpoint or stretch needle should be used for sewing knit fabric while a sharp or all-purpose needle is designed for woven fabrics. There are also many specialty sewing machine needles designed for a specific fabric and the combination of a specialty needle and the fabric you are sewing may be needed.
If you are sewing leather, you may need to invest in a leather sewing machine needle. You can easily become educated a learn everything about sewing machine needles to avoid frustration.
Thread quality is always a consideration. Although many people believe that the quality of thread does not make a difference, microscopic views of the various types of sewing thread could convince them otherwise. If you are using specialty thread and have skipped stitches, it doesn't necessarily mean your machine can't use it, but it can be a challenge. If you notice that the stitching is different on the top and the bottom of the fabric, you will need to adjust your sewing machine tension.
Your sewing machine manual is your best source for learning how to adjust the tension on your sewing machine. Almost all sewing machine manuals can be found online if you've lost track of your printed copy.
0コメント